General Information · 100% Nonwoven wallpaper · Printable with Latex and UV curable inks · PVC-free, no plasticisers, glassfiber or solvents used · No heavy metals or formaldehyde · Very quick ink drying · Photorealistic print quality · Environmentally safe product · Very good water and scratch resistance
Areas of Application · Indoor advertising · Individual room decoration · Shop window backdrops · Advantages · Dimensionally stable and will cover smaller fissures / cracks · Dry strippable if correct glue is used · Available up to 320cm width · Flame retardant properties Comments
Please log in to write comments.
Print properties
Processing instructions The wall surface must be dry, clean, porous and even For pasting, use nonwoven wallpaper paste with water 1:10. Do not leave to soak! It is recommended to apply the paste onto the wall and then apply the wallpaper onto the pasted wall. Correctly / accurately trimmed tiles can be applied edge-to-edge Overlapping tiles have to be applied by cutting through the overlapping parts and removing the cutoff Use a soft roller or soft brush to press / smooth the wallpaper against the wall surface and to remove any wrinkles or bubbles Wipe away excess glue using a wet cloth or a wet sponge Optimum processing conditions 18° ‐ 25°C and a humidity of approx. 40% ‐ 65%.
|
|