printable with Latex-, UV curable-, Eco Solvent- and Solvent inks
Areas of application
Recommended for e.g.: Any flat and transparent surfaces, windows, shop windows, glass doors, mirrors
great for contour cutting / plotting!
Advantages
Dry-, bubble free and easy to apply
permanent adhesive with high tack forlong term application
Comments
Please log in to write comments.
Complete drying of the print is required before further processing, a drying time of 24 hours is recommended. The substrate must be dry, clean, absorbent and smooth To avoid air bubbles when gluing, the surface to be covered can be sprayed with clear water. The water can then be stroked out with a squeegee. To protect the print during processing, the carrier film can be placed between the printed image and the squeegee. Bonding with pressure roller or felt squeegee without sharp edges. To avoid fingerprints, the use of cotton gloves is recommended. The optimum room climate during processing is 15 ° - 25 ° C and a humidity of 40% - 65%.
Polymers PVC glass decorative film with sandblasting effect for all smooth and transparent surfaces such as windows, glass doors, shop windows and mirrors.